Xhorse Electronics Mvci Driver For Toyota Tis Download › ♥ Mvci Driver For Toyota Tis X64 Download Windows 10 ♥
  1. Xhorse Electronics Mvci Driver For Toyota Tis Download Pc
  2. Xhorse Electronics Mvci Driver For Toyota Tis Download 2017

Xhorse VVDI2 for VW/Audi/BMW/Porsche Full Version Software Download: Xhorse VVDI2 Full Version V6.8.2 software download link For SV86 4. Xhorse VVDI MB BGA Tool software, free download: V5.0.6 software download link For SK185-B and SK185 5. VVDI BMW Tool Software Download: V1.6.5 update link for the VVD BMW Tool For SK283 ,SK283-B 6. Mar 15, 2018 How to install MINI VCI Toyota TIS Techstream 10.10.018? Open “MVCI Driver folder”. Xhorse MVCI 3 in 1 Toyota MVCI obd2 interface program keys manua. Mercedes Star diagnosis Windows 7 software C4 12/2015 Xentry Das. 2015A Cat Caterpillar et adapter iii software download, free cat.

Mvci Driver For Toyota Tis X64 Download Windows 10

I have this MiniVCI J2534 with windows 10 x64 and Techstream 11.30.024 running and it can read my vehicle data via OBD2 port. However I want to verify the MiniVCI J2534 firmware by running 'Firmware Update Tool' under c:'C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS' I can see the process in Task Manager as MVCIConfigurationTool MFC Application (32bit) but there is no. Configuring Mini VCI to work with Windows 10. After I installed the software, my Windows 10 didn’t recognized the Mini VCI driver. The instillation CD included “MVCI Driver for TOYOTA.msi”, but when trying to install, I received this error. Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS”. Copy IT3System.ini. Jun 08, 2019 Installing MVCI Driver for TOYOTA This is the step which most people stumble upon as “MVCI Driver for TOYOTA.msi” installer indeed does not work on Windows x64. The workaround is to install it manually, as follows: Open Command Prompt in Administrator Mode. Navigate to the c:temp folder and run the following command line. Normally i install the MINI VCI FOR TOYOTA TIS Techstream on windows xp computer, but now i have changed my computer system to win 7 64bit, so it is not easy to find another xp computer. Last month, i read in forum, it can be installed on 64bit win7/win8. Ad i would like to share to you. MINI VCI J2534 cable (bought from Toyota Mini VCI on 64 bit Windows. I purchased a Mini VCI cable to perform diagnostics on a Toyota from an online site and it arrived with a cd containing drivers, the Techstream software, and some PDF documents with instructions. XHorse ElectronicsMVCI Driver for Toyota TIS.

(12/2017) Free download TOYOTA TIS Techstream V12.30.017 software and install on Windows 7 or Windows 10, to get it work with Techstream cables like Mini vci j2534 cable, Vxdiag vcx nano for toyota diagnostic tool, etc.

TOYOTA TIS Techstream V12.30.017 download free:

Ver: 12.30.017

Password: Not required!

Security: Unknown

TOYOTA Techstream V12.30.017 activation:


Credits to Autokent

Toyota Techstream 12.20.024 crack download with security:

It’s crack version. No need activation

Tested OK with Mini VCI cables (SV46, SV46-B), Mangoose VCI (SV46-C) and Vxdiag Vcx Nano for Toyota

Techstream install windows 7:

Step 1: install Toyota Techstream 12.20.024 software

open Techstream 12.20.024 disk F:

copy all files to another new folder on Desktop

open Techstream 12.20.024 setup application

choose a setup language for installation

preparing setup

Next to install Techstream software

accept the agreement

enter the user name and company name, then Next

begin Techstream 12.20.024 installation

installing Techstream 12.20.024…

successfully installed Techstream

Finish Techstream v12 installation

Step 2: replace the MainMenu.exe

copy the MainMenu.exe

go to Techstream Properties on Desktop

open file location

paste and replace MainMenu.exe in Program files/toyota diagnostics/techstream/bin

Step 3: install MVCI driver

run MVCI driver for TOYOTA TIS SETUP

Next to install MVCI driver


installing MVCI driver

Finish MVCI driver installation

Step 4: register Techstream

run Techstream application on Desktop

Yes to continue

close the internet explorer

this is Toyota Techstream ver.12.20.024 interface

register Techstream software 12.20.024

it’s Techstream crack version

use key (attached to the Instructions.txt) to register


exit Techstream

Mvci Driver For Toyota Tis X64 Download

Step 5: check MVCI fw version

run MVCI firmware update tool on Desktop

exit MVCI firmware update tool

Step 6: run Techtsream 12.20.024

run Techstream application on Desktop for use


Techstream install windows 10:

This is a how-to’s of TechStream10.10.018 on my Windows 10 64-bit tablet. Here are the steps:

Mvci Driver For Toyota Tis X64

  1. Installed TechStream software
  1. Extracted XHorse install package into temporary directory, e.g. in command shell msiexec /a “MVCI Driver for TOYOTA.msi” /qb TARGETDIR=<destination path>

Where destination path = path to temporary directory

  1. Copied contents of extract to C:Program Files (x86)XHorse ElectronicsMCVI Driver for Toyota TIS
  1. Downloaded and installed the 64-bit registry hack (contents below – save text to file and name file with .reg extension, run to install via RegEdit)

Windows Registry Editor Version 5.00:

[HKEY_LOCAL_MACHINESOFTWAREWow6432NodePassThruSu pport.04.04]

[HKEY_LOCAL_MACHINESOFTWAREWow6432NodePassThruSu pport.04.04XHorse – MVCI]

“Name”=”XHorse – MVCI”

“Vendor”=”XHorse ELECTRONICS Co.,Ltd.”

“ConfigApplication”=”C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TISFirmwareUpdateTool.exe”

“FunctionLibrary”=”C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TISMVCI32.dll”



“ProtocolsSupported”=”J1850VPW:1, J1850PWM:1, CAN:1, ISO9141:1, ISO14230:1, ISO15765:1”












  1. Rebooted tablet
  2. Plugged in J2534 Mini-VCI cable. Windows 10 automatically detects the cable. You will notice in device manager it adds 3 devices:

Ports (COM & LPT) -> USB Serial Port (COM<n>) where <n> = a system assigned number

Universal Serial Bus Controllers -> USB Serial Converter

Vehicle Interface Module

Interestingly enough, Windows 10 installs the most up to date drivers for these devices. I tried to manually install the MVCI drivers from the MSI, no avail – on reboot, Windows 10 overwrites these.

Anyways, I don’t think manually updating the drivers is necessary with the registry hack.

  1. Loaded TechStream
  2. In the menu, go to Setup -> VIM Select -> select Interface Setup = XHorse – MVCI
  3. Turn vehicle to ON, position II
  4. Select ‘Connect to Vehicle’ and you should be able to connect!

The tips are for those that are currently trying to use the software Techstream V10.10.018 to change dealer settings on their BRZ/FRS with a MINI-VCI cable & Techstream. Having done Google searches for several hours, and I found that the way of installing TOYOTA Techstream V10.10.08 in 64-bit OS is almost the same as V8.00.034. Here is the ways of installing TOYOTA Techstream V10.10.018 in 64-bit OS, which is I revised on the basis of V8.00.034 (quoted from a forum). So do not care about the version in the following, just pay attention the steps.

Note: I have tried it in this way successfully, and maybe there exist risks; you should be responsible for what you do if you wants to have a try.

Equipment Needed:
1. MINI VCI cable for TOYOTA TIS Techstream. I bought mine from for nearly $27. The cable is about 4’ long, with translucent casing and “MINI-VCI J2534 Standard OBDII Communication Interface” sticker. This cable comes with a mini CD with drivers and Toyota Techstream software.
2. A laptop running 64-bit version of Windows 7/8. Mine is actually Windows 7 x64, but for Windows 8 the configuration procedure should be identical.

1. Download and install a trial version of WinRAR (download from if you don’t already have it.
2. Using WinRAR Unpack the following files from either the mini-CD or the download to a temp folder on your hard drive (Use c:temp).

– Toyota Techstream 8.00.034
– Techstream_Update_V8.10.021
– MVCI Driver for TOYOTA
3. Now open WinRAR again. Using the program, navigate to the temp folder with unpacked files and double click the TISKey.exe in WinRAR.
The TISKey.exe is actually a self-extracting (SFX) RAR archive file. 2018 toyota camry carplay. Once executed, it simply unpacks and copies the IT3System.ini file to the Techstream folder. Extract the IT3System.ini file to desktop for now.
step 3 is no longer required after V10.00.028. (suggested by a forum bro who have succeeded in it:
4. Installing MVCI Driver for TOYOTA:

This is the step most people stumble on as “MVCI Driver for TOYOTA.msi” installer indeed does not work on Windows x64. The workaround is to install it manually, as follows:

Xhorse Electronics Mvci Driver For Toyota Tis Download Pc

a. Open the Command Prompt in Administrator Mode, and run the following command line:

msiexec /a « C:tempMVCI Driver for TOYOTA.msi » /qb TARGETDIR=c:tempmvci

This will extract the content of the MSI file to the c:tempmvci folder. Go ahead and close the Command Prompt window, and open up the c:tempmvci folder :
b. Delete the “MVCI Driver for TOYOTA.msi” there. (Now go into C:Program Files (x86) and then create a new folder called « XHorse Electronics » and then inside of that folder create another called « MVCI Driver for TOYOTA TIS ») Then copy the whole content of c:tempmvci to « C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS »
c. Plug the MINI VCI cable to the USB port.
d. Open the Device Manager and locate the two failing devices in the list. Both will appear with yellow icon (usually under “Other”), indicating that Windows failed to install drivers for them. Now, right click each failing device, select Install Driver, then “Browse my Computer…” and point it for « C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS » (enable the “include subfolders” flag). Click “Next” and wait until drivers are installed.

You should now see two new devices: “Universal Serial Bus ControllersUSB Serial Converter” and “Ports (COM & LPT)USB Serial Port (COM5)”.
e. Run the FirmwareUpdateTool.exe from the « C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS ». Click “Device Info”. You should see the “device connected” screen like this:
If you see this, it means your MINI VCI is up and running under Windows x64 and can be used by other programs, such as Techstream.

IMPORTANT: Some people have reported that updating firmware on this “cheap clone” cable may render it dead. So, the Firmware Update Tool should NOT be used for anything, but checking that the device is connected and working properly.
5. Now install the Techstream software using « Techstream 8.00.034.exe » and then after installation, open up the « Techstream_Update_V8.10.021.exe » file to update it. DO NOT launch it yet.

To activate it, drag the IT3System.ini you extracted before to the desktop over into « C:Program Files (x86)Toyota DiagnosticsTechstreamEnv ». When prompted, overwrite the preexisting file with the new one you are dragging over.
6. Registry Hack: for Techstream to recognize MINI-VCI under Windows x64, the Registry has to be modified as:

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINESOFTWAREWow6432NodePassThruSu pport.04.04]

[HKEY_LOCAL_MACHINESOFTWAREWow6432NodePassThruSu pport.04.04XHorse – MVCI]
« Name »= »XHorse – MVCI »
« Vendor »= »XHorse ELECTRONICS Co.,Ltd. »
« ConfigApplication »= »C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TISFirmwareUpdateTool.exe »
« FunctionLibrary »= »C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TISMVCI32.dll »
« APIVersion »= »04.04 »
« ProductVersion »= »1.1.0 »
« ProtocolsSupported »= »J1850VPW:1, J1850PWM:1, CAN:1, ISO9141:1, ISO14230:1, ISO15765:1 »
« J1850VPW »=dword:00000001
« J1850PWM »=dword:00000001
« ISO9141″=dword:00000001
« ISO14230″=dword:00000001
« CAN »=dword:00000001
« ISO15765″=dword:00000001
« SCI_A_ENGINE »=dword:00000000
« SCI_A_TRANS »=dword:00000000
« SCI_B_ENGINE »=dword:00000000
« SCI_B_TRANS »=dword:00000000

The attached « mvci-x64.reg » (download from ) contains the *.REG file that has to be imported to the Registry (all you have to do in this step is just extract the file to the desktop, right click, then click Merge)

A trick here is the « Wow6432Node » in key path, which is the location the 32-bit applications running on 64-bit OS get redirected to when accessing Registry. The « PassThruSupport.04.04 » seems to be the place Techstream looks into for available VIMs (sub-keys appear in the « VIM Select » menu in Techstream).
7. Run Techstream. Go to Setup VIM Select menu and select the “XHorse – MVCI”
8. Connect MVCI cable to your car’s OBDII interface, turn ignition on, then click “Connect to Vehicle” in Techstream. Wait. Then wait again (by the way, you’ll be doing that a lot with this cable). If everything works, you will be prompted to confirm car year/model after which you’ll get to the diagnostic interface.
Note: If your software is lower than V10.10.018, please run Techstream. Go to Setup VIM Select menu and select the “XHorse – MVCI” before step 3.

Just to clear it up, you do not have to register this software after this is all done, it is yours forever (almost). Mostly all of the customizable options can be accessed with this update so I would not mess with it and try to get anything new as it is not needed!

Xhorse Electronics Mvci Driver For Toyota Tis Download 2017

Hope this will help you really.

Ceci est du support technique du site to install Techstream V10.10.018 in Windows 7/8 64bit OS

Qui ont consulté cet article ont également consulté: